Antec NeoPower 480 Watt Modular Power Supply

Feel like you are living in a dream? Constantly haunted by the nightmares of faulty or poorly engineered power supplies? Well today I offer you the “Red Pill” of power supplies. The Antec NEOPOWER 480 features an advanced cable management system that allows you to only use the cables you need, reducing system clutter and improving internal airflow. It also sports an Active PFC that allows the power supply to monitor power consumption and deliver more environmentally friendly power. Stringent +/- 3% tolerances ensure system stability and performance. Antec also ensures superior electrical conductivity through gold plated connectors on all the plugs. An ultra quiet 120 mm fan with active fan control guarantees more then adequate ventilation. The choice between the Red and the Blue Pill is obvious, so step up to a higher standard of power with the Antec NEOPOWER 480.

• NEO power supply with 24 pin main connector, 4 pin 12V P4 connector, and 3 pin fan monitoring connector
• 1 x 47cm cable with 3 Molex connectors
• 2 x 77cm cable with 3 Molex connectors
• 1 x 77cm cable with two SATA connectors
• 1 x 40cm cable with two fan only MOLEX connectors
• 1 x 14cm cable splitter (1 x MOLEX to 2 x Floppy)
• 1 x 10cm 24 pin to 20 pin adapter
• 1 x 60cm cable with PCI Express connector
• 2 x Spare MOLEX Connectors
• 2 x Spare SATA Connectors

• Type: ATX
• Maximum Power: 480W
• PFC: Active
• Ultra Quiet Low Speed 120mm fan
• Hold-up Time: 20ms at full load
• Efficiency: 70%(min) at full and typical loads, 115V/230V AC 60/50Hz 60%(min) at light load
• Over Voltage Protection: +5V trip point < +6.2V, +3.3V trip point < +4.1V, +12V trip point < +14.3V
• Input Voltage: 100V AC to 240V AC +/- 10%
• Input Frequency Range: 47Hz – 63Hz
• Input Current: 12/6A
• Output: +3.3V@30A, +5V@38A, +12V1@18A, +12V2@15A, -12V@1A, +5VSB@2A
• MTBF: 80,000 hours at 25°C
• Approvals: TUV, UL, CUL, CE, CB, FCC Class B, NEMKO
• Dimensions: 5.9" x 3.4" x 5.5'