Koolance 1200W Liquid-Cooled Power Supply

Fully submersed electrical components...not usually a phrase you want to hear when you are describing your expensive computer parts. Unless of course you are talking about Koolance's 1.2 Kilowatt Liquid Cooled Power Supply! Unlike other watercooled power supplies that only use water blocks and heatpipes on certain components, Koolance's unit utilizes a special non-conductive fluid to completely fill the power supply's chassis bathing the internals in a cool liquidy goodness!

The PSU-1200ATX-12S features 96 combined amps over four 12V rails, modular cables, and 4 PCI-Express connectors for SLI and CrossFire support. It is able to unleash 1200W of continuous power with a astronomical 1400W peak at greater than 80% efficiency by operating in a completely submerged state. This patent-pending design is superior to even 'partly' liquid cooled and heatpipe power supplies. All internal electronics are immersed in a non-conductive fluid and dissipated through an external heat exchanger.

Being self-cooled, Koolance's 1200W PSU requires no connections to any other type of cooling system. The unit comes pre-filled and no ongoing coolant maintenance is required. The quiet 120mm LED fan is temperature-controlled and operates between 25-33dBA. An included temperature sensor allows internal monitoring when used with compatible Koolance systems (TMS, RP-1000, PC3-700, Exos-2, and PC4-1000 series).

The PSU-1200ATX-12S can be used in most ATX, E-ATX, and BTX chassis that provide for 9' (23cm) power supply depths, including cable space. The external heat exchanger is highly adjustable to maximize chassis compatibility. Being slightly wider than the internal power supply, it can be rotated 180° and moved vertically 2' (5cm) to help avoid physical conflicts. Quick disconnect shutoff valves allow for the convenient attachment of the heat exchanger during installation.

If you are looking for the ultimate power supply for your gaming rig, workstation, or any application that requires the utmost stability and reliability under demanding conditions look no further then the PSU-1200ATX-12S from Koolance. Because if you do, you will just be waiting your time.

• 1 x 24-pin Mainboard
• 1 x 8-pin P8
• 4 x 6-pin PCI Express
• 6 x SATA
• 12 x 4-pin Molex
• 1 x 4-pin FDD

• Power Input:
  • Voltage: 90~264VAC
  • Current: 15A
  • Power Factor Correction: Active PFC
• DC Power Output:
  • Peak Output: 1400W
  • Continuous Output: 1200W
  • Current:
    • +5V: 30A
    • +12V: 96A Combined
      • +12V1: 18A
      • +12V2: 18A
      • +12V3: 30A
      • +12V4: 30A
• Efficiency: >80%
• Hold-up Time: 16ms
• PG Delay: 100~500ms
• Fan: 120mm Dual Ball Bearing, 20-107CFM, 25-33dBA, Auto Temp Sensing
• Tubing Size: 1/4' ID
• PSU Dimensions: 152 x 81 x 210mm(W x H x D)
• Heat Exchanger Dimensions: 172 x 141 x 105mm (W x H x D)

NOTE: Supports ATX, E-ATX, and BTX chassis with room for 9' (23cm) power supply depths (including cable space). The PSU-1200ATX-12S can be run upright or on one of its sides, but only these two specific directions are available.