Home > PowerLinc Modem - INSTEON USB Interface (Dual-Band) for PC Control
PowerLinc Modem - INSTEON USB Interface (Dual-Band) for PC Control
Product Description
- Easy, trouble-free USB connection
- Control INSTEON and X10 devices from compatible HA software
- Interface supports INSTEON extended messages
- Supports 1,000+ links
The USB INSTEON PowerLinc Modem is a USB-based home automation interface that allows PC- and hardware-based automation controllers to control INSTEON-compatible lights, appliances, heating/air conditioning systems and alarm systems directly via the INSTEON network. The dual-band interface sends and receives both powerline and radio frequency (RF) INSTEON signals, so it doubles as an Access Point. This makes it ideal for new INSTEON installations if you have or plan to use an RF-only INSTEON-compatible remote, thermostat, motion sensor and contact sensor. The RF signal can bypass electrical noise or attenuation near the PC and it pulls many of the "distant" INSTEON devices one hop closer, which can expand the size of potential installations into even larger homes and commercial buildings.
New features:
- Built-in Dual-Band with RF function, acts like an Access Point for phase bridging and RF to/from power line
- 1023 links (compared to around 800 links previously)
- Added a beep sounder
- Red/Green LED light
- Supports faster reading and writing of the PLM's database by another controller
- Much lighter weight
- No pass-through outlet
Please Note: The controller connected to the USB INSTEON PowerLinc Modem must remain powered on and running the controller program connected to the controller or host at all times of usage. Additionally, the dual-band interface does not supply power to external devices.
Important Note: This PowerLinc interface is not compatible with HouseLinc Desktop Software. A HouseLinc-enabled interface is available with HouseLinc - INSTEON Desktop Software USB.
What's Included
- PowerLinc Modem - INSTEON USB Interface (Dual-Band)
- Quick Start Guide
- USB Cable - Type B to Type A
Specification:
General |
|
Brand |
INSTEON |
Manufacturer Product No. |
2413U - PowerLinc Modem - INSTEON USB Interface (Dual-Band) |
UPC |
891114000136 |
Patent No. |
U.S. Patent No. 7,345,998, International patents pending |
Warranty |
2 years, limited |
General |
|
Interface |
USB |
Baud Rate |
19,200 Kbps |
USB Current Draw |
0 mA |
USB ID |
VID: 0x403, PID: 0x6001 |
Operation |
|
Status LED |
Green + Red LED |
Local Control |
None |
Operation Modes |
INSTEON only, x10 only, INSTEON and X10 Combo Mode |
Combo Mode Message Order |
INSTEON, X10, INSTEON Cleanup |
Combo Memory |
Non-volatile EEPROM |
INSTEON Features |
|
INSTEON Addresses |
1 hard-coded out of 16,777,216 possible |
INSTEON Links |
1,023 |
INSTEON Power Line Frequency |
131.65 KHz |
INSTEON Device Category |
0x03 (Network Bridges) |
INSTEON Device Sub-Category |
0x15 |
INSTEON Minimum Transmit Level |
3.2 Vpp into 5 Ohms |
INSTEON Minimum Receive Level |
10 mV |
INSTEON Messages Repeated |
Yes |
Mechanical |
|
Operating Conditions |
Indoors, 32 to 104° F, up to 85% relative humidity |
Dimensions |
3.9" H x 2.6" W x 1.5" D |
Weight |
4.0 oz |
Electrical |
|
Supply Voltage |
120 Volts AC +/- 20%, 60 Hertz, single phase |
Certification |
Safety tested for use in USA and Canada (ETL #3017581) |
X10 Features (applies to power line only) |
|
X10 Controllable Addresses |
256 possible |
X10 Powerline Frequency |
120 KHz |
X10 Minimum Transmit Level |
3.2 Vpp into 5 ohms |
X10 Minimum Receive Level |
20mV into 5 ohms |
X10 Messages Repeated |
No |