- Save energy and money on bills by remotely controlling your thermostat
- Works with heat/cool and heat pump systems
- All settings are stored in non-volatile memory and are not lost during power failures
- Perfect for anyone whose schedule varies throughout the week
- Award-winning INSTEON technology: the ultimate in simplicity and reliability
Control the temperature from anywhere in the house! This Venstar Thermostat allows you to recall stored set point/mode settings from any INSTEON-compatible controller. Faster than grabbing a blanket, you can use your coffee table RemoteLinc to recall "comfort mode," bringing the room to the perfect temperature. When turning off your lights for the night from your bedside KeypadLinc, you can also save some energy and money by recalling "energy-savings mode," which minimizes the activity of your HVAC system while you're sleeping. Because you can program any button on an INSTEON controller to any temperature and mode on the thermostat, the possibilities are endless.
This product contains the Venstar T1800 thermostat along with an embedded INSTEON Thermostat Adapter; this thermostat requires power to function. If you do not have a "common" wire running to your thermostat from your heating/cooling equipment, you may need either to run a new wire or to install a thermostat Add-A-Wire kit.
Set up different heating/cooling programs to best fit your schedule. A program can be set up for each day of the week, so you can completely customize your climate control, even if it varies from one day to the next. If your daily schedule tends to stay the same, simply the programming process with the 1-day programmable version.
Note: Because the thermostat is an RF-only INSTEON product, at least one dual-band INSTEON device is required to communicate with your other INSTEON devices. This thermostat is not compatible with Venstar accessories that connect via the jack (located at the bottom of the unit).
What's Included
- Venstar T1800 Thermostat with embedded INSTEON Thermostat Adapter
- Mounting hardware
- Manual
- Installation instructions
- Quick-Start Guide
Specification:
General |
|
Brand |
INSTEON |
Manufacturer |
SmartLabs Design |
Manufacturer Product No. |
2491T7E |
UPC |
813922012149 |
Patent No. |
U.S. Patent No. 7,345,998, International patents pending |
Dimensions |
4 3/4" x 4 1/4" x 1 1/8" |
Range |
150' (line of sight) |
Frequency |
915 MHz |
Weight |
0.5 lbs |
Warranty |
1 year |
Operation |
|
Setup Memory |
Non-volatile EEPROM |
Software-Supported Features (as available via software such as HouseLinc) |
|
Heat set point |
Supports all set points of Thermostat |
Cool set point |
Supports all set points of Thermostat |
Temperature Status Request |
Supported |
Mode Status Request |
Supported |
Fan Status Request |
Supported when in "Auto" mode |
Mode Control |
Heat, Cool, Auto, OFF |
Fan Control |
On, Auto |
Degree Format (F/C) |
As supported by Thermostat |
INSTEON Features |
|
INSTEON Addresses |
1 hard-coded out of 16,777,216 possible |
INSTEON Links |
417 |
INSTEON Messages Repeated |
Yes |
Mechanical |
|
Operating Conditions |
Indoors, 32 to 122°F, up to 85% relative humidity |
Storage Conditions |
Indoors, 32 to 122°F, up to 85% relative humidity |
Electrical |
|
Input Power |
24VAC |
FCC Certification |
ID SBP4715 |
Digital Thermostat Specifications |
|
Manufacturer |
Venstar |
Manufacturer Product No. |
T1800 |
Control Stages |
3 heat, 2 cool |
Compatible Systems |
Heat/cool;heat pump |
Approvals |
UL listed, FCC Compliant, Energy Star Compliant |